Teltonika industrial 5G router RUTX50

Teltonika RUTX50 is a very powerful 5G router equipped with Dual-SIM with automatic switching, WAN backup and other software functions. A wide range of hardware interfaces, 5x Gigabit Ethernet connections and dual-band Wi-Fi allow this product to be used in industrial environments where speed and robustness play an important role...


Technical data :

5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) - LTE Cat 20 2.0 Gbps DL, 200 Mbps UL; 3G - 42 Mb/s DL, 5.76 Mb/s UL
Status: Signal Strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes Sent/Received, Linked Band, IMSI, ICCID
SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network refused, data connection error, SIM card idle protection
SMS: Status SMS, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, SMPP
USSD : Supports sending and reading messages with unstructured additional services
Black/White list: operator list
Multiple PDNs: Option to use different PDNs for multiple network accesses and services
Band management: Band lock, display used band status
APN: Automatic APN
Bridge: Direct connection (bridge) between mobile ISP and LAN device
Passthrough: Router assigns its mobile WAN IP address to another device in LAN
< br /> 

ETHERNET:

WAN 1 x WAN port, 10/100/1000 Mbps, IEEE 802.3, IEEE 802.3u, 802.3az compliant, supports MDI auto crossover /MDIX
LAN: 4 x LAN ports, 10/100/1000 Mbps, IEEE 802.3, IEEE 802.3u, 802.3az compliant, support MDI/MDIX auto crossover

 

NETWORK

Routing: Static Routing, Dynamic Routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy Based Routing
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP , MQTT, Wake On Lan (WOL)
VoIP gateway support: H.323 and SIP-alg protocol NAT helpers to enable correct routing of VoIP packets
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot , LCP and ICMP for connection inspection
Firewall: Port, traffic rules, custom rules
DHCP: Static and dynamic IP assignment, DHCP Relay
QoS / Smart Queue Management (SQM): Priority traffic queued by source/destination, service, protocol or port, WMM, 802.11e
DDNS: >25 service providers supported, others can be configured manually
Network backup: Cellular, VRRP, wired options, each of which can be used as an automatic failover
Balance Internet traffic across multiple WAN connections
SSHFS: Ability to mount a remote file system via SSH protocol

 

WIRELESS

Wireless mode: 802.11b/g/n/ac Wave 2 (WiFi 5) with a data transfer rate of up to 867 Mbps (Dual Band, MU-MIMO ), 802.11r Fast Gateway, Access Point (AP), Station (STA)
Wi-Fi Security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, auto-encryption modes, client separation
SSID/ESSID: Stealth ESSID mode
Wi-Fi users: up to 150 simultaneous connections
Interception portal (hotspot), internal/external server Radius, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group restrictions, user management, 9 default themes that can be customized
Wireless Network (802.11s), Fast Roaming (802.11r), Relayd
Wireless MAC Filter
White List, Black List

 

Power supply:
Connection: 4-pin industrial DC socket
Input voltage range: 9 – 50 VDC, reverse polarity protection, overvoltage protection >51 VDC 10us max< br />Power consumption: Standby consumption: < 4 W, maximum < 18 W

 

PHYSICAL INTERFACES

WAN: 1 x RJ45 port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports automatic crossover MDI/MDIX
LAN: 4 x LAN ports, 10/100/1000 Mbps, IEEE 802.3, IEEE 802.3u, 802.3az compliant, support MDI/MDIX automatic crossover
I/O: 2 x adjustable I/O pins on 4-pin power connector
Status LEDs
3 x LEDs for link type status, 3 x LEDs for link strength, 2 x LEDs for LAN status, 1 x LED for power< br />SIM: 2 x SIM slot (Mini SIM – 2FF), 1.8V/3V
Power: 1 x 4-pin power connector
Antennas: 4 x SMA for mobile
br />USB: 1 x Virtual Network Interface via micro USB
Reset: Restart/Reset/Factory Reset button
Mounting options: DIN rail, flat surface
< br /> 

The package contains: 1x Teltonika router Wi-Fi 5G 2xSIM GPS DIN RUTX50, 1x UTP cable, 1x Power supply, 1x USB cable, 7x Antenna, 1x Instructions